1.IV Set Management and Flow Rate Calibration
IV sets can be added, stored and deleted in memory, and easily used after calibration.
2.Optional Infuse Rate Unit
d/min, mL/h and volume/time
3.Infusion Mode
Drip-rate and volumetric
4.Pumping Mechanism
Peristaltic finger pump
5.IV Sets
Standard IV sets of 10, 15, 20 and 60d/mL, with diameter 3.4 ~ 4.5mm.
6.Flow Rate Range
1.0 ~ 1200 mL/h
7.Drip Rate Range
10 d/mL IV set: 1.0 ~ 200 d/min
15 d/mL IV set: 1.0 ~ 300 d/min
20 d/mL IV set: 1.0 ~ 400 d/min
60 d/mL IV set: 1.0 ~ 150 d/min
8.Increment
From 0.1 mL/h to 99.9 mL/h, 0.1 mL increment; ≥100 mL/h, 1 mL increment.
9.Flow Rate Accuracy
≤ ± 5% (after calibration)
10.Drip Rate Accuracy
≤ ± 1.5%
11.Volume Limit
1 ~ 9999 mL
12.Volume Infused Display
0 ~ 9999 mL & >9999 mL
13.Purge Rate
600 mL/h
14.KVO Rate
1 mL/h
15.Bolus Mode
Available for Bolus mode, flow rate adjustable.
16.Occlusion Pressure
Pressure detection device with 8 sensitivities setting, 40 ~ 140KPa.
17.Air-in-line Detection
Air bubble detected by ultrasonic and the device with 8 sensitivities setting, 50 ~ 1000μL.
18.Alarm Volume
8levels setting
19.Anti-reverse Function
Anti-reverse function on motor to prevent upstream
20.Self-check
Self-check when start up and during infusion
21.Audio and Visual Alarms
Air-in-line, Door open, Occlusion, Infusion finished, Pause overtime, Leakage, Empty, Low battery, Battery damaged, etc.
22.Display
Blue LCD with high brightness
23.Power Source
AC: 100V ~ 240V, 50Hz/60Hz, ≤ 25VA
24.Battery
Rechargeable Ni-MH battery: DC12V, 2000mAh, life: ≥ 4 hours at 25mL/h